Плата цап AK4493 для Raspberry Pi

Плата ЦАП AK4493 для Raspberry Pi Application: Raspberry Pi dedicated AK4493 decoder board, support 32BIT/384KHZ DSD128 Support 3 generation B-type (3B) and 3 generation B+ type (3B+) Raspberry pi. Features: - Professional I2S processing chip realizes DOP to DSD and recognizes I2S 16, 24, 32BIT audio format. - Support 32BIT/44.1-384KHZ DSD64-DSD128 output, full frequency switching without popping sound. - Raspberry Pi is output through I2S mode, playing music, smooth listening, real and natural. - Use the general version of VOLUMIO, MOODE, set the I2S-DAC mode to HiFiberry DAC to play. - VOLUMIO universal version driver can support 44.1-192KHZ DSD64 output - MOODE universal version driver can support 44.1-384KHZ DSD64-DSD128 output - LPF using low distortion, low noise OPA1612 op amp, dual voltage power supply(±15V) , effectively play the potential of the op amp. - Two sets of DSD digital filter coefficients can be set by 6 sets of PCM digital filter coefficients by jumper combination, and a variety of styles sounds can be experienced just with one board. Parameters: - Two-channel single-ended RCA block output: 2.0Vrms/-0dB - 3.5 headphone jack (the headphone jack is actually connected directly to the RCA seat, not suitable for directly driving the headphone) - Two ways of Powered: 1. Directly use micro-usb to power the Raspberry Pi from its 40P interface. 2. Power is supplied from the DC-seat input interface of the board, through the 40P interface. Notice: the two types of power supply cannot use at the same time, otherwise it will cause damage to the board, raspberry pie or power supply. - Power supply voltage: DC +5V(±5%) - Power interface specification: 5.5/2.1, inside is positive and outside negative - Recommended supply current: >2000MA - Board working current: 200MA (excluding raspberry pi) Packing list: 1*DAC decoder board. В подарок отличный БП на 3 Ампера. По желанию добавлю плату Raspbery Pi3 B. Цена комплекта 6400р. Разумный торг.