Genelec 1094A, сабвуфер 50кг

сабвуферы на фото - подколонками Genelec 1094A Technical Specifications Free field frequency response ( ±2.5dB): 29 - 80 Hz Maximum short term sine wave acoustic output in half space, averaged from 35 Hz to 85 Hz @ 1m: > 120 dB SPL Self generated noise level in free field @ 1m on axis (A-weighted): < 10 dB Harmonic distortion at 100 dB SPL @ 1m on axis in half space (30-100 Hz): < 3% Driver: 385 mm (15") Weight: 50 kg (110 lbs) Dimensions: Height Width Depth 739 mm 468 mm 620 mm AMPLIFIER Amplifier output power (Long term output power is limited by driver unit protection circuitry): 400 W (8 Ohm) Amplifier system distortion at nominal output: THD < 0.08% SMPTE-IM < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% Signal to Noise ratio, referred to full output: > 100 dB Mains voltage: 100/200V or 115/230V Power consumption (average): Idle 60 VA Full output 650 VA FILTER Subsonic filter (18 dB/octave) below: 29 Hz Crossover frequency (sub/main monitors): 85 Hz Crossover frequency (sub input channel): full band/85 Hz Crossover acoustical slope Lowpass: Highpass: 28 dB/octave 12 dB/octave Midband rejection, frequencies > 400 Hz: > 50 dB Bass roll-off control operating range in 2 dB steps: from 0 to -6 dB @ 33 Hz Phase matching control in 90° steps: from 0° to -270° @ 85 Hz